B5

Description

Ultrasonic portable thickness gauge for the rapid measurement of metallic and nonmetallic products in production environments.

Purpose

The device is designed to measure the thickness of products from metallic and nonmetallic materials (sheets, tanks, pipes, pipelines, bridges, metal containers, transport and other structures, including highly corroded, with incrustation, etc.) during operation to determine their corrosion state on or after the manufacture of energy, tube, engineering, shipbuilding, transportation and other enterprises.

Technical features

• measurement range for steel, T, mm, 0,6... 200;
• sound velocity, m/s, 1000 - 9999;
• resolution (keypad selectable), mm: 0,1; 0,01;
• accuracy, mm,
  T = 0,6 to 10,0             ±(0,002T +0,03);
  T = 10,0 to 200,0            ±(0,002T +0,05);
• the opportunity to gain control: yes;
• data memory: up to 2000 measurements;
• automatic probe recognition;
• the transfer of data to PC:  yes;
• display: graphic backlit LCD;
• power — Battery  9V;
• operating temperature: -10° - +50°C (standard); -30° - +50 °C (on request);
• dimensions, mm, 120x60x25;
• weight, g, 170 including batteries;
• connectors - Lemo 00.

Particulars

High sensitivity, simplicity and ease of operation. Automatic probe recognition. The possibility of manual and automatic adjustment of sensitivity. Backlit display. Graphic LCD with an extended keypad provides a user-friendly interface with the device, issuing the results of performance information. Ability to store and view the results of measurements, transfer them to the IBM PC and the statistical treatment, using the attached program NDT1-DATA.

Delivery set

Sensory processing module with probes (number and set is coordinated with the Customer), cable of communication with PC and CD with program of data transferring and processing, thickness specimens (in coordination with the Customer), calibration guide, certificate, package.

Probes for thickness gauge B5

5A10

Dual element probe.

Purpose

Measurement of thickness of walls of metal tanks, containers, pipes of big diameters.

Technical features

• operation frequency, MHz, 5;
• thickness range (for steel), mm, from 1,0 to 200,0;
• dimensions of contact surface, mm, Ø10;
• overall dimensions, mm, Ø18x26;
• operating temperature range: from -10° to +60°C.

Particulars

Utilization of new synthetic materials provides low wearability and good interfacing with rough surfaces.

10A6

Dual element polyimide probe.

Purpose

Measurement of thickness of pipes, curved areas of containers with small radius.

Technical features

• operation frequency, MHz, 10;
• thickness range (for steel), mm, from 0,6 to 20;
• dimensions of contact surface, mm, Ø6;
• overall dimensions, mm, Ø14x26;
• operating temperature range: from -10° to +60°C.

Particulars

Utilization of new synthetic materials provides low wearability and good interfacing with rough surfaces.

5T12

Dual element high-temperature probe.

Purpose

Intended for testing the thickness of hot metal parts. Used with thickness meter B5.

Technical features

• operation frequency, MHz, 5;
• thickness range (for steel), mm, from 1,0 to 200,0;
• dimensions of contact surface, mm, Ø14;
• overall dimensions, mm, Ø27x50;
• operating temperature range: from -10° to +250°C.

10A4

Small-sized dual element probe.

Purpose

measurement of wall thickness of pipes, thin metal plates.

Technical features

• operation frequency, MHz, 10;
• thickness range (for steel), mm, from 0,5 to 10;
• dimensions of contact surface, mm, Ø4,5;
• overall dimensions, mm, Ø9x11;
• operating temperature range: from -10° to +60°C.

Particulars

High locality, possibility of testing in hard-to-access locations (longerons, pipes with small diameter, etc).

NDT1 2009